Home /
Replacement filter elements
Replacement filter elements, matched from the OEM part number
Send us an OEM part number and we confirm the element that replaces it — dimensions, media and
micron rating checked against the original drawing. 28 part numbers are cross-referenced below, covering
gas coalescing, high-flow water, activated carbon and compressed-air elements.
Where the number is obsolete or unreadable, send the setting dimensions, the housing model or a
photograph of the element in place. The match is confirmed in writing before anything is produced.
1 working dayCross-reference confirmed from our Singapore office.
Drawing checkDimensions, media and micron rating compared to the original.
From 1 pieceTrial, maintenance and emergency replacement orders accepted.
Part numbers we cross-reference
PECO — PS-336 series
| Part number | Range | Key specifications held | Our product page |
|---|
| PS-336-CC-10EB | Natural gas filters | Material: Glass/Polyester/Acetate Fiber · Initial ΔP: <0.05MPa | Compatible with PECO PS-336-CC-10EB |
| PS336-CC-40LB | Natural gas filters | Pressure: 0.4/1.6/4.0/6.4MPa · Temp: -10℃ to +85℃ | Compatible with PS336-CC-40LB |
Pall — PCHG / Ultipleat / large-flow
| Part number | Range | Key specifications held | Our product page |
|---|
| PCHG-336 (frameless) | Natural gas filters | Pressure: 0.1-42MPa · Temp: -40℃ to 150℃ | Compatible with PCHG-336 frameless filter element |
| PCHG-336 | Natural gas filters | Pressure: 0.1-42MPa · Temp: -40℃ to 150℃ | Compatible with PCHG-336 filter element |
| HFU640UY200J | Water treatment filters | OD: 6″ (152mm) · Length: 20/40/60″ (535/1024/1524mm) | Compatible with HFU640UY200J |
| MFF-OP-PP-5 | Water treatment filters | OD: 180mm, Length 40″ · Accuracy: 1-50µm | Compatible with MFF-OP-PP-5 |
| TBG-100-40-P | Water treatment filters | OD: 6″(152mm), Length 20″/40″/60″ · Material: Glass Fiber/PP | Compatible with TBG-100-40-P |
Parker — high-flow element families
| Part number | Range | Key specifications held | Our product page |
|---|
| RFP 050-40N | Water treatment filters | Material: PP/Glass Fiber · OD: 152mm | Compatible with RFP 050-40N |
| PK high-flow | Water treatment filters | OD: 152mm large diameter · Material: PP/Glass Fiber | Compatible with PK high-flow filter element |
| PA high-flow | Water treatment filters | OD: 6″(152mm), Length 20/40/60″ · Material: Pleated Glass Fiber/PP/Melt-Blown PP | Compatible with PA large flow filter element |
| DZ high-flow | Water treatment filters | OD: 180mm, Length 40″ · Accuracy: 1/5/10/20/50µm | Compatible with DZ high-flow filter element |
| MFB high-flow | Water treatment filters | OD: 6.5″(165mm), Length 40″(1040mm) · Material: PP | Compatible with MFB high-flow filter element |
| DD high-flow | Water treatment filters | OD: 180mm, Length 40″ · Accuracy: 1/5/10/20/50µm | Compatible with DD high-flow filter element |
| BTR high-flow | Water treatment filters | Material: PP, area ≥12m² · OD: 170mm (cap 200mm, ID 71.5mm) | Compatible with BTR large flow filter element |
| FS high-flow | Water treatment filters | Material: PP/Fiberglass/Microfiberglass · OD: 6″(152mm)/6.5″(165mm) | Compatible with FS large flow filter element |
| HTC-170 | Water treatment filters | OD: 197mm, Length 245/495/781mm · Material: Polyester fiber (PU end cap) | Compatible with HTC-170 High flow filter element |
HILCO — JVF / JRF / JPMG
| Part number | Range | Key specifications held | Our product page |
|---|
| JVF 1120-C | Activated carbon filters | Pressure: 0.1~6.4MPa · Temp: -10~100℃ | Compatible with JVF 1120-C |
| JRF 1120-C | Activated carbon filters | Pressure: 0.1~6.4MPa · Temp: -10~100℃ | Compatible with JRF 1120-C |
| JPMG 336-CE-R | Natural gas filters | Initial ΔP: <0.05MPa · Dehydration: water ≤0.05% | Compatible with JPMG 336-CE-R |
| JVF636 | Activated carbon filters | Pressure: 0.1~6.4MPa · Temp: -10~100℃ | Compatible with JVF636 |
| JRF722 | Activated carbon filters | Pressure: 0.1~6.4MPa · Temp: -10~100℃ | Compatible with JRF722 |
Votech — Duotov 90 series
| Part number | Range | Key specifications held | Our product page |
|---|
| Duotov-90/559 | Natural gas filters | Pressure: 0.4/1.6/4.0/6.4MPa · Temp: -10~+50℃ | Compatible with votech duotov-90/559 |
| Duotov-90/838 | Natural gas filters | Pressure: 0.4/1.6/4.0/6.4MPa · Temp: -10~+50℃ | Compatible with votech duotov-90/838 |
Other OEM part numbers
| Part number | Range | Key specifications held | Our product page |
|---|
| 214275A | Air compressor filters | Pressure: 0.1~42MPa (working) · Temp: -40~150℃ | Compatible with 214275A |
| FE715X5 | Air compressor filters | Sizes: φ36×64 ~ φ115×470mm (custom) · Material: glass fiber sintering, SS fiber sintering felt | Compatible with FE715X5 |
| RK060P | Air compressor filters | Sizes: φ36×64 ~ φ115×470mm (custom) · Material: glass fiber sintering, SS fiber sintering felt | Compatible with RK060P |
Elements ordered by part number
| Part number | Range | Key specifications held | Our product page |
|---|
| WFF-125-1 | Water treatment filters | Type: stator cooling water cartridge · Media: PP ultrafine fibers thermal bonded | WFF-125-1 |
| HGPPB-4-70-P-X-AERO | Water treatment filters | Material: special high-performance fiber · Support: stainless steel rod | HGPPB-4-70-P-X-AERO |
How we match a part number
01 — IdentifyPart number, drawing or photograph of the element in place.
02 — CompareOutside diameter, length, end caps, seal material and media type.
03 — ConfirmMicron rating and pressure rating returned in writing with any deviation.
04 — QuoteUnit price, lead time and packing stated once the match is fixed.
Questions we are asked about cross-reference
What do you need to match a part number?
The OEM part number is usually enough. If the number is obsolete or unreadable, send a dimensioned drawing, the housing model, or a photograph of the element in place with a ruler beside it, and we confirm the match against those references.
Can you supply a single element?
Yes. Single pieces are quoted for trial, maintenance and emergency replacement, and the same drawing check applies to a one-piece order as to a batch.
Is the micron rating identical to the original?
We match the original rating where the medium allows it and state the closest available rating where it does not. The confirmed rating is written on the quotation and repeated on the packing list, so the number you approve is the number you receive.
How long does the cross-reference take?
One working day to confirm the match from our Singapore office. Production lead time is stated on the quotation once the element and quantity are fixed.
Do you provide material and dimensional certificates?
Yes on request, for the media, the mesh or sintered layer, and the end-cap and seal materials. Dimensional reports are available for elements matched from drawings.
Are these original manufacturer parts?
No. Every element listed here is manufactured by DAYU FILTER as a cross-reference replacement. Manufacturer names and part numbers are used only to identify the element being replaced.
Browse by application range
All manufacturer names, part numbers and trademarks shown on this website are the property of
their respective owners and are used for cross-reference purposes only. DAYU FILTER is not affiliated with,
endorsed by, or an authorized distributor of these manufacturers unless expressly stated. Elements listed here
are manufactured by DAYU FILTER as replacements and are not original manufacturer parts.